This all natural Hemp Oil Wood Finish is very easy to apply. Simply pour or brush on and wipe away the excess with a rag.
250 ml – Covers approximately 40 square feet
- Food Safe
- No Chemicals
- No additives or preservatives
- NO VOC’s
- Biodegradable
- 100% Natural Hemp seeds
-Tough Coat Matte-
Do you need extra protection for that high traffic area? Try our Tough Coat Matte
Tough Coat, uses only 100% acrylic and is perfect as a top coat sealer for those high traffic surfaces such as table tops, seating, doors and floors and dries to a matte finish. Fusion Tough Coat differs from other finishing coats or varnishes with its use of pure acrylic. Normally other products on the market are using lesser acrylic resins which will yellow and embrittle over time, not binding as well leaving a less durable finish.
Tough Coat Clear: a true non yellowing clear coat
Application: Apply with a brush onto recently painted or clean, non oily/greasy surfaces. If applying to a recently painted surface, allow the surface to dry 12 hours before applying. For maximum durability, apply two coats waiting 2-4 hours between coats. In humid areas, longer drying times may be required.
Clean Up: Soap and warm water.
Tip: Be sure to gently mix your Tough Coat prior to using it as the matting agent and other ingredients may settle to the bottom. If you don’t mix it, you may get a shiny coat finish as the matting agent has settled to the bottom. Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied.
NOTE: Fusion Tough Coat may appear milky when applied over dark Fusion Mineral Paint colours, such as Coal Black, Ash, Chocolate and Midnight Blue. We recommend using Fusion Beeswax Finish or Fusion Natural (Clear) Stain and Finishing Oil instead of Fusion Tough Coat for top coating dark colors.
-Pouring Resin-
Pouring Resin is an acrylic pouring medium for creating beautiful art on canvas or wood, and dries with a glossy finish.
This Pouring Resin mixes seamlessly with Fusion to create beautiful and unique acrylic pour artwork. It can be used on canvas, furniture, or any surface that Fusion sticks to. It finishes to a very durable, glossy finish, and can even be used on its own as a finish or top coat over Fusion Mineral Paint. It can even be painted on top of for a multi-dimensional look.
– Durable glossy finish
– Easy to Use
– No topcoat needed
– Non-toxic
– No VOCs
HOW TO USE
Stir Pouring Resin before using. Best used on a horizontal surface for best application, as Pouring Resin is self-levelling.
To add colour, add a couple of drops of any Fusion Mineral Paint to tint the Resin (no more than 10% paint ratio). You want to use very little paint so that the flow stays very liquid.
Tap your surface to settle air any bubbles.
If using Cell Enhancer, afterwards be sure to wipe those areas clean with a bit of rubbing alcohol to remove the shiny wet look.
Dry time: 8-12hours | Re-coat time: 12-24 hours | Cure time: 21 days